⅝″ ColorStorm Hose End Mender Set

Description

Garden Hose Coupling Replacement Parts

Upgrade your garden hose couplings with Dramm’s ⅝″ Garden Hose End Mender Set. The set contains both male and female hose end fittings with screw-tight clamps.

• Crush-proof nickel plated, brass fittings
• Easy Tighten Clamps
• Easy DIY Fix

---

Repair Any ⅝″ Garden Hose – Easy Garden Hose Fix!

DIY Install Instructions

1. 1. Trim the old garden hose coupling(s) from your garden hose. Use a sharp hose cutting tool or blade to make a clean and square cut (90° to the hose length).
   2. Slide a clamp onto an end of your ⅝″ hose. Push it a few inches past the very end so you have room to work.
   3. Insert the male or female coupling into your ⅝” garden hose. You may want to let the hose-end lay in the sun or soak in some warm water to make it more pliable.
   4. Slide the clamp over the area where the coupling was inserted. The clamp should be directly over the ribbed part of the coupling that’s inserted into the hose.
   5. Tighten both screws. Tighten the first screw only a couple turns, and the second screw with 2 or 3 turns. Alternating back and forth so the clamp closes evenly. Continue to tighten the clamp until no leaks occur.
   6. Repeat the procedure for the other end of your hose.

---